How to Fit Garage Bottom Door Seals

JA Seals high-quality garage door bottom seals effectively block draughts, dust, and water from entering under your door. While this guide gets your garage sealed quickly, an extra set of hands can simplify installation.

First, choose the best spot for the seal on the bottom inner door edge. Pre-drill holes in the carrier if needed, then secure the aluminium carrier with clamps or tape for drilling. Next, mark the screw positions with a pencil through pre-drilled holes or drill directly with a 2.5mm bit. Ensure the door closes properly before screwing, and trim excess seal if needed.

Use a cordless drill or screwdriver to fasten the included self-tapping screws. Finally, remove any clamps and enjoy a weatherproof garage!

This guide helps you install your JA Seals bottom seal securely with a professional look. For more information on JA Seals installation, download our detailed PDF or contact our team.

WATCH VIDEO

Step 1

Start by finding the ideal spot for the seal on the bottom inner edge of your garage door. Pre-drill the seal carrier if needed.

Step 2

Secure the aluminium carrier with clamps or strong tape for drilling. An extra hand holding it steady can be helpful.

Step 3

Once the seal is positioned, mark the screw holes. Use existing holes or create your own with a 2.5mm drill bit.

Step 4

Using a screwdriver or a drill, secure the self-tapping screws. Remove any clamps once properly secured.

Step 5

As a final step. check the garage door to ensure it closes properly and trim any excess seal if necessary.